Local Services

Remodeler Santa Ana CA

Santa Ana Awning Installation

Published Apr 08, 25

12 min read

Table of Contents

– Rv Sofa Sleeper Santa Ana, CA
– OCRV Center
– Rv Sofa Sleeper Santa Ana, CA
– Rv Sofa Beds Santa Ana, CA
– Rv Sofa Beds Santa Ana, CA
– Rv Carpet Replacement Santa Ana, CA
– Rv Sofa Sleeper Santa Ana, CA
– Rv Sofa Beds Santa Ana, CA
– Motorhome Carpets Santa Ana, CA
– Rv Replacement Awnings Santa Ana, CA
– Rv Upholstery Santa Ana, CA
– Replacement Windows For Campers Santa Ana, CA
– Rv Carpet Installation Santa Ana, CA
– OCRV Center

Rv Sofa Sleeper Santa Ana, CA

OCRV Center

23281 La Palma Ave Yorba Linda, CA 92887
(714) 909-1444
OCRV Center

I'm gon na get all this linoleum out. I'm gon na get the vinyl back past the side of the door, and after that actually have a great look at how things look.

Up here in this edge it's punky. It's soft sufficient that I believe with a hammer and a flat bar, I can begin tearing some plywood out of there. And what that little exploratory surgical procedure is gon na do is offer me a feel for what the system looks like, which will then tell me, you understand, I believe at some time below, gon na finish up running a round saw, and cutting back to excellent wood and after that replacing the bad things.

Rv Sofa Sleeper Santa Ana, CA

Like I said, I think I can, I can peel sufficient of the negative things out of there to at least obtain a feeling for what I have. Well, truthfully, where I go to that rapidly is sufficient to provide me an excellent feel for finding out what I need to do following.

We can replace that as we obtain the brand-new flooring in right here as well. So what this will let me do, seeing this, I think what I can do next is obtain a circ saw cut down right here someplace, and then peel off back to that point. We'll go from there and simply keep, like I stated earlier, taking a bad flooring out till we get to solid stuff.

Rv Sofa Beds Santa Ana, CA

Currently it's possible that this is gon na end up being type of L-shape, because in the center of the camper over here, that flooring appears quite great, but naturally that negative place is still there by the door, and this has to appear. Currently my program is cutting back to a joist right here someplace to obtain to strong timber.

Now, the other thing I wan na discuss is this. When I took that first chunk of plywood out, I did that reducing and I got rid of the material, and I recognized pretty fast, I need to've had a mask on.

Rv Sofa Beds Santa Ana, CA

Among the important things I do intend to mention, I'm being actually careful functioning around the membrane that's under the floor. And the factor is the membrane layer is in fact still intact, and I do not wish to suddenly get my foot in the wrong place and action with it or something and placed a large tear in it.

I'm truly meticulously functioning around this by walking just on the joists, the sleepers, and after that also just being actually, truly mindful about where I tip and where I place cams and stuff. So here's where I go to. On this beyond the camper, one of things that's actually good information is that the plates on the base of the wall surfaces are all in actually good form, which honestly shocked me for the condition of every little thing else in below.

On this specific wall, the joist, the last edge piece that's out below on the exterior of the camper is still there and it remains in fine shape. The trouble I'm up versus is that if I do not sister something along with it below, when I come in with plywood, I will not have anything to toenail the plywood to.

Rv Carpet Replacement Santa Ana, CA

Straightforward stuff. I suggest, all I'm doing is obtaining it in position, and afterwards I'm opting for screws for every little thing instead of nails just to make certain I get a great bite, and it remains stuck once it remains in there. And more of the very same. I'm just going to drive screw after screw after screw to safeguard these components together and see to it they remain stuck.

So I'm obtaining that edge item in. And one of things to be observant of is that due to the skin on the exterior of the trailer, I can not get fasteners through this, the board we simply placed in and link it right into that. So instead I am making use of angle irons here.

Talk a lot more concerning that. But among the points, one of the important things also, that I intended to mention is that I did a switch, a screw switch, after I started on that first piece, I was including back in. I recognized that those screws I was making use of were no place near beefy adequate for what we were asking of them.

Rv Sofa Sleeper Santa Ana, CA

Now with these, what that angle iron will do is connect these two items together. And then the other point to keep in mind right here is that when the deck begins, once plywood comes on, and that overlays these items and all, and gets secured to them, that additionally is going to aid link every little thing so that it ties these components together.

The angle iron plus the plywood is gon na aid with that. That's why I maintain my hearing defense in, also when all I'm doing is driving screws. And in a restricted environment like this, you understand, once again, we want to be safety and security mindful throughout this.

And the factor for that is I used a jigsaw, portable jigsaw, and I cut them back and they're not always cut back yet to the factor where I go to great timber, and I'm gon na tie right into them. We'll enter that yet. But what I intended to do was cut back where I recognized the ends misbehaved, and I needed to supply some clearance to make it very easy to get that edge item in.

Rv Sofa Beds Santa Ana, CA

The following step is mosting likely to be begin bringing those sleepers, the floor joists back in, and after that from there insulation and plywood. Much more flooring, floor, floorings are us. What I've noticed and you may have seen also, there's a membrane layer that's under the camper, and it's really sandwiched. It's over the steel framework and below the sleepers or the wooden joists.

And I own a staple weapon and I can staple it, but I seemed like I want something on that that I recognize is gon na be a little extra robust link is, is most definitely gon na maintain that fabric limited. So right here's my plan with that said. I have actually obtained a table saw in the structure, and we'll speak much more regarding devices here in just a 2nd.

And I believe it's truly crucial that this is treated due to the fact that it's going to live outdoors under the camper, not inside the camper. Making use of the table saw I tore that into fifty percent inch thick strips. So these are one and a half by fifty percent. And obviously the sleepers, the joists are on edge.

Utilizing a counter sink in my drill, I've already pre-drilled these, and I did that so that when I start driving screws, I do not take a possibility of splitting these. So I'm quite near to the following action, which is crawl below there, and drive screws through the pre-drilled holes.

Motorhome Carpets Santa Ana, CA

We're obtaining prepared up below. The screws must likewise be outside to make certain that they're gon na not rust away on you. As soon as you have actually got these prepared currently, like I claimed, we can get underneath there, and be some tricky cam work to get this for you, but we'll obtain these secured up in position to the base of the sleepers.

And then certainly, an option of hand tools, circ saw, belt sander, jigsaw, saws all. And with the larger devices, with the miter saw and the table saw, that was necessary, because as I began to generate those brand-new joists that I was exchanging in, I really did not intend to have to frequently go to a few other store and cut components, return, cut parts, return.

So following, um, let's crawl under a camper. Well, I'm under the camper currently, obviously, and you can see over there, I've currently obtained a pair of battens in place and one more one below. So what I'm doing is really feeling through the material, and afterwards there's a joist right there.

And after that, brr, brr, must have the ability to just drive some screws. Oh yes, so it's good. The batten is just imitating an actually huge washer to ensure that that fabric does not have the possibility to tear via and come loose. That is certainly going to hold that in place.

Rv Replacement Awnings Santa Ana, CA

The next thing inside here is to look for a point where we get to good material, and after that link into that with a new piece in a way that structurally is gon na job. And likewise simply is easy sufficient to do. So, let me get some tools gathered, and afterwards we'll take a look at out with the old and in with the new below.

I've got a poor end, quickly recognized, since that wood remained in really, truly poor form. And after that just looking at the remaining lumber here. I'm searching for a component below where it gets audio. Now, the various other point I understand is that below right here, right there is a steel element of the trailer.

Rv Upholstery Santa Ana, CA

If I needed to return better with the system I will use here, I would be fine keeping that. Santa Ana Awning Installation. If in order to get rid of bad material, I needed to reduce back here where I'm not over a steel structure element, I would do that. What I've done so far lies the steel

And the next thing, allow's obtain that bad area cut out. And what I desire to do as I reduce is also raise a little bit. And I have actually already obtained a brand-new item cut.

And here's the point. And the method this is gon na job is we're gon na bridge that seam with those plywood scraps. And paired with the plywood, we're going to add adhesive and screws, and that is actually gon na make this primarily just like having one lengthy item once again when we're done.

I have got in my hot little hands, another piece to go on that side. I just have to get my platform out of the way here.

Replacement Windows For Campers Santa Ana, CA

And when this is done, that is gon na be a truly, actually solid system. The last item of plywood is about to obtain put in, yet allowed's talk about a couple points.

This is a good application for it. Due to the fact that of making use of that, that becomes part of the reason that I intended to make certain those battens obtained under the material. And the reason being that that mineral woollen, it's got some density to it. Currently it's not that sitting there, I'm anxious about it collapsing, especially with the battens that I place beneath, however just be observant that if you make use of that it does have some weight to it, and you wan na see to it that that material under the camper is gon na sustain that.

So when I'm cutting this piece, the piece that's gon na complete below, I would love to keep the manufacturing facility side on that particular end butting against the factory edge that's already in position, and then the cut side heads out right here up versus the wall surface. Currently, if you need to do a trim, you have to do a trim, and in this instance I did.

So if you got ta do it, you obtained ta do it, however it in the ideal world, factory edge to manufacturing facility edge below on the lengthy seams, and on the short joints where pieces are satisfying. The various other thing is that we desire to be fifty percent on a joist. What I suggest by that is that this portion of plywood is half on this joist, and after that the next piece of plywood is gon na come on here, so it's got something to be attached to, and that's just a, you understand, a building guideline that you constantly follow when you're doing floor covering or roof covering.

Rv Carpet Installation Santa Ana, CA

There aren't any type of portions of insulation laying on top of the framing. I have actually obtained, if you watch out right here, I have actually got these locations marked on the wall surface, to ensure that as I occur with a screw weapon, extra on that particular in a 2nd, I know that sleeper, that joist exists, center exists, facility is there.

I don't have a stapler that'll do that, yet I do possess a screw weapon that I can utilize to drive long screws. All right, a lot of talking, and let's look at getting the plywood to come in.

OCRV Center

Address: 23281 La Palma Ave Yorba Linda, CA 92887
Phone: (714) 909-1444
OCRV Center

Well, we finished with a whole lot of screwing around.The whole flooring was a lot of screwing about. Just a lot of little fussy points to do to get this right, however most definitely worth doing, since clearly there were some poor places in below that needed to go. With those screws, if there's any type of location where you seem like you could've missed, obtain a standard cordless screwdriver, back those screws out.

Share us on...

Table of Contents

– Rv Sofa Sleeper Santa Ana, CA
– OCRV Center
– Rv Sofa Sleeper Santa Ana, CA
– Rv Sofa Beds Santa Ana, CA
– Rv Sofa Beds Santa Ana, CA
– Rv Carpet Replacement Santa Ana, CA
– Rv Sofa Sleeper Santa Ana, CA
– Rv Sofa Beds Santa Ana, CA
– Motorhome Carpets Santa Ana, CA
– Rv Replacement Awnings Santa Ana, CA
– Rv Upholstery Santa Ana, CA
– Replacement Windows For Campers Santa Ana, CA
– Rv Carpet Installation Santa Ana, CA
– OCRV Center

Local Services

Navigation

Home